NUG
Thaum xaiv lub microphone, thawj qhov kev txiav txim siab yog hom microphone koj xav tau. Yog tias koj yog tus hu nkauj uas kaw hauv studios, lub mic condenser yog qhov kev xaiv ntse. Txawm li cas los xij, rau txhua tus neeg ua haujlwm nyob, lub mic dynamic yuav tsum yog koj lub microphone mus.
*** Cov neeg ntaus suab paj nruag nyob yuav tsum tau txais lub microphone dynamic.
*** Condenser microphones yog qhov zoo rau studios.
*** USB microphones yog qhov yooj yim siv.
*** Lavalier microphones yog ib feem ntawm condenser microphones uas koj yuav pom hauv kev xam phaj nquag. Cov clip no tso rau hauv khaub ncaws thiab ntes tus neeg hais lus lub suab nyob ze thaum tsis txhob khaws lwm lub suab vim qhov sib thooj.


  • diamond hand polishing pads for ceramic stone marble MIC300 caj npab tsim

    MIC300 caj npab tsim

    Specifications: Polar qauv: Uni-directional Zaus teb: 20Hz-20kHzrhiab heev: -32dB ± 2dBMax.SPL: 120dBTeeb liab rau suab nrov piv: 10dBSampling tus nqi: 192kHz / 24bitCable ntev: 2.5mFais fab mov: USB DCSV fais fab mov Plug: USB
  • diamond hand polishing pads for ceramic stone marble MIC108

    MIC108

    Specifications: Xim: Dub Polar qauv: Cardioid Fais fab mov: USB DCSV fais fab mov Cable ntev: 1.5m Lub mloog pob ntseg tso zis: 3.5mm Cov ntaubntawv povthawj siv interface: 3.5mm Tone caj npab: capacitive Zaus: 30Hz-20Khz Reverberation qauv: suab reverberation ntawm ncha
  • diamond hand polishing pads for ceramic stone marble MIC300 Desktop

    MIC300 Desktop

    SpecificationsPolar qauv: Uni-directionalZaus teb: 20Hz-20kHzrhiab heev: -32dB ± 2dBMax.SPL: 120dBTeeb liab rau suab nrov piv: 10dBSampling tus nqi: 192kHz / 24bitCable ntev: 2.5mFais fab mov: USB DCSV fais fab mov Plug: USB
  • diamond hand polishing pads for ceramic stone marble MIC820

    MIC820

    Specifications: Kev taw qhia: Omnidirectionalrhiab heev: -55dB ± 2dBZaus teb: 50Hz-16KHzimpedance: ≤2.2KΩKev ua haujlwm siab: 1.5V SNR: 36 dBCable ntev: Approx.1.7m Loj: 3.5mm
  • diamond hand polishing pads for ceramic stone marble MIC400

    MIC400

    Specifications: Kev taw qhia: Omnidirectionalrhiab heev: -55dB ± 2dBZaus teb: 50Hz-16KHzimpedance: ≤2.2KΩKev ua haujlwm siab: 1.5V SNR: 36 dBCable ntev: Approx.1.7m Loj: 3.5mm
  • diamond hand polishing pads for ceramic stone marble MIC 200

    MIC 200

    Specifications: Kev taw qhia: Omnidirectionalrhiab heev: -55dB ± 2dBZaus teb: 50Hz-16KHzimpedance: ≤2.2KΩKev ua haujlwm siab: 1.5V SNR: 36 dBCable ntev: Approx.1.7m Loj: 3.5mm
  • diamond hand polishing pads for ceramic stone marble MIC190

    MIC190

    Polar Pattem: UnidirectionalZaus teb: 20Hz-20kHzrhiab heev: 45dB ± 2dBCov zis impedance: 1500Ω ± 30% (ntawm 1kHz)Load impedance: ≥1000ΩCov suab nrov sib npaug: 16dBAMax.SPL: 130dB(ntawm 1kHz≤1% T.H,D)S/N ratio: 78dBHluav taws xob tam sim no: 3mA
  • diamond hand polishing pads for ceramic stone marble MIC170

    MIC170

    Specifications: Condenser microphone Teb zaus: -42+/-2dB (1.5V680Ohm)Nrog kab Jack: XLR txog 3.5mm Cable ntev: nyob ib ncig ntawm 1.8m ctn loj: 63 * 43 * 42.5cm 30pcs / ctn Qhov hnyav: 17.50KG
  • diamond hand polishing pads for ceramic stone marble MIC106

    MIC106

    Specifications: Kev taw qhia: Omnidirectionalrhiab heev: -42dB Teeb liab rau suab nrov piv:
  • diamond hand polishing pads for ceramic stone marble MIC105

    MIC105

    Plug thiab Ua Si20 meters debLub suab meejSiab rhiab heevTxo suab nrovDav sib haum
  • diamond hand polishing pads for ceramic stone marble MIC101

    MIC101

    Kev taw qhia: Omnidirectionalrhiab heev: -42dB Teeb liab rau suab nrov piv:
  • diamond hand polishing pads for ceramic stone marble MIC 100

    MIC 100

    Specifications: Polar Pattern: Omni-Kev taw qhia Zaus teb: 20-20KHzrhiab heev: -30DB ± 2DBLub hwj chim: 2-5V Plug: 3.5mm Cable ntev: 6M / 1.25m
  • diamond hand polishing pads for ceramic stone marble M700 Nws

    M700 Nws

    Specifications: Technical Specification1, Ntau zaus: UHF zaus2, Zaus Channel: 10 raws, ID code yog hloov random.3, Oscillation Hom: DSP nti zaus xauv.4, Kev ruaj ntseg: ± 10ppm5, Zaus Zog: 10dBm6, Zaus teb: 40 ~ 18KHz7, Kev hloov pauv: ≤ 0.5%8, Roj teeb: 1.5V / AA Loj9, Lub Sij Hawm Ua Haujlwm: 4-8 teev.Txais Specification:1, Ntau zaus: UHF
  • diamond hand polishing pads for ceramic stone marble M08

    M08

    Specifications: Kev taw qhia: Unidirectionalrhiab heev: -55dB ± 2dBZaus teb: 50Hz-16KHzimpedance: ≤2.2KΩKev ua haujlwm siab: 1.5V SNR: 36 dBCable ntev: Approx.1.7m Loj: 3.5mm
  • diamond hand polishing pads for ceramic stone marble PEB 711

    PEB 711

    Specifications: Kev taw qhia: Omnidirectionalrhiab heev: -55dB ± 2dBZaus teb: 50Hz-16KHzimpedance: ≤2.2KΩKev ua haujlwm siab: 1.5V SNR: 36 dBCable ntev: Approx.1.7m Loj: 3.5mm
Page 1 of 1
GuangDong Besell Electronics Co., Ltd / sitemap / XML / Privacy Policy   

Tsev

PRODUCTS

Txog Peb

Hu rau